Publication : Mechanical Engineering

28 years of enriched experience...an organisation with undisputed success in the field of education

International Journal

Arindam Chattopadhyay. Optimization and Design approach of a Conceptual Solar Thermal Steam Generator. International Journal of Engineering Research & Technology (IJERT), 2017. ISSN: 2278-0181

Nitesh Kumar. Optimization of pulsed Nd-Yag YVO4 Laser through transmission welding acrylic and polycarbonate. MATERIALS TODAY PROCEEDINGS-JOURNAL-ELSEVIER, 2017. ISSN:2214:7853

Nitesh Kumar. Study on the effect of process parameters on weld width and HAZ of pulsed LASER welding of dissimilr transparent thermoplastics without filler matrials in lap joint, 7th Inte. MATERIALS TODAY PROCEEDINGS-JOURNAL-ELSEVIER, 2017. ISSN:2214:7853

Ranit Karmakar, Gourab Chakraborty. Investigation and Control of Slider Displacement of Prototype of Password controlled Security Door through Arduino UNOMicrocontroller. International Journal of Scientific and Engineering Research (IJSER), 2016. ISSN 2229-5518

Ankur Das. Supplier selection for a pump manufacturing organization by hybrid AHP-TOPSIS technique and it's impact on inventory. International Journal of the Analytical Hierarchy Process, 2016. ISSN:1936-6744

Naveen Kumar Gupta, P. Prakash, P. Kalaichelvi & K. N. Sheeba. The effect of temperature and hemicellulose-lignin, cellulose-lignin and cellulose-hemicellulose on char yield from the slow pyrolysis of rice husk. UESO-2014-0310.R1 ENERGY SOURCES, PART A: RECOVERY, UTILIZATION, AND ENVIRONMENTAL EFFECTS 2016, VOL. 38, NO. 10, 1428–1434

Reeshab Goenka, Prakash Parthasarathy, Naveen Kumar Gupta, Navneet Kumar, Biyahut & Sheeba Narayanan. "Kinetic Analysis of Biomass and Comparison of Its Chemical Compositions by Thermogravimetry, Wet and Experimental Furnace Methods". Waste and Biomass Valorization in Springer Journal, 2015. ISSN 1877-2641, Vol.- 6.

Prakash Parthasarathy, Naveen Kumar Gupta & K. Sheeba Narayanan (2015). Effect of composting on products of slow pyrolysis. Biofuels in “Taylor and francis Online Journal. ISSN:1759-7277

Nitesh Kumar. Combustor Characteristics under Dynamic Condition during Fuel – Air Mixing using Computational Fluid Dynamics. Journal of Advances in Mechanical Engineering and Science, 2015. ISSN:2455-0957

Jyotirishwar Kumar, S. Saha. Laminar modelling and simulation on cutting fluid flow through sudden contraction nozzle. International Journal of Engineering Research and general science, 2015. ISSN:2091-2730, Vol. 3, Issue 3.

Rajat Kabiraj. Design and implementation of a four bar linkage gripper. IOSR-JMCE, 2014. ISSN:2278-1684

Uttam Roy, Satyabrata Podder, Pranibesh Mandal. Numerical Analysis of Fuzzy Logic Control and PID ControlResponse for an Electro-Hydraulic actuation System. International Journal of Mechanical Engineering, 2013. ISSN: 2051-3232

Gourab Chakraborty, Satyabrata Podder, Uttam Roy. Three Dimensional Thermal Mapping of Single PointCutting Tool using Finite Element Method and its Experimental Verification. International Journal of Mechanicaland Production Engineering Research and Development (IJMPERD), 2013. ISSN: 2249-6890

Satyabrata Podder, Uttam Roy. ANFIS Based Weld Metal Deposition Prediction System in MAG Welding using Hybrid Learning Algorithm. International Journal of Fuzzy Logic Systems (IJFLS), 2013. ISSN: 1839-6283

International Conference

Satyabrata Podder. Investigation of Effect of Metallurgical Parameters on Machining of EN9 Steels in Supplied & Post Heat Treatment Condition. International Conference on EmergingTrends in Informatics & Communication (ICETIC-2016)

Gourab Chakraborty. An Experimental Investigation of Mechanical Properties of EN25 Steels & Optimization of Machining Parameters of the Same in Annealed, Normalized & Hardened Condition. 2nd Regional Science & Technology Congress, 2017.

Nitesh Kumar. The Effect Of Process Parameters On Pulsed Nd:yvo4 Laser Welding Of Acrylic And Polycarbonate Sheets

Jyotirishwar Kumar, S. Mandal, N. Mahto. Study of electro chemical machining etching effect on surface roughness and variation with chemical etcinh process. The Conference on Precision Engineering COPEN-10/IIT Madras, 2017.

Accepted for 10th InternationalConference on Precision, Meso, Micro and Nano Engineering. The Conference on Precision Engineering COPEN-10/IIT Madras, 2017

National Conference

Gourab Chakraborty, Satyabrata Podder. Numerical Analysis Slip Flow Heat Transferin a Microchannel Heat Sink. National Conference on Advances in Thermal Engineering (NCATE-2016)

Arindam Chattopadhyay. Numerical simulation of conjugate heat transfer with slip flow for gaseous substance in microchannel. National Conference on Advances in Thermal Engineering (NCATE-2016)

Gourab Chakraborty. Hazards and safety measures in Mining industries. Advances in Metal and Mineral processing Industries of India in National Policy Perspective, 2017.

Nilanjan Mondal & Jyotirishwar Kumar. Designing of wind turbine blade using source code for solution of axial and tangential interference factors by iterative approach. 25th West Bengal State Science & Technology Congress, 2017.

Jyotirishwar Kumar. Numerical Investigation of Diesel in Water imulsion. 25th West Bengal State Science & Technology Congress, 2017.